| TOKYO KEIKI SQP2-17-86C-18 Single Vane Pump | rs min:1.5 mm; Nlim (oil):7,000 rpm; ra max:1.5 mm; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:5.92 Hz; Brand:NTN; da min:68 mm; Mass:0.78 kg; Fatigue limit load, Cu:1.64 kN; Da max:102 mm; |
| TOKYO KEIKI SQP1-6-86C-18 Single Vane Pump | Designation of bearing:US207-22G2T20; E:12.5 mm; d:34.92 mm; s1:16 mm; Recommended tightening torque for set screw:8 Nm; H1:12 mm; H2:93 mm; L:103 mm; S:8.5 mm; C0:15.2 kN; |
| TOKYO KEIKI SQP3-25-86C-18 Single Vane Pump | N1:16 mm; Designation of open end cover:SCOU206-20; P:150 mm; T min.:-20 °C; Recommended tightening torque for set screw:3.7 Nm; Designation of bearing:US206-20G2; G:M6x1; C0:11.2 kN; S:8 mm; Dz:70 mm; |
| TOKYO KEIKI SQP2-12-86C-18 Single Vane Pump | Characteristic cage frequency, FTF:0.44 Hz; Fw:14 mm; Lubrication hole on outer ring:Non/No; C0r:8.5 kN; Nlim (grease):10,000 rpm; D:20 mm; Dw:2 mm; C2:16 mm; Characteristic inner ring frequency, BPFI:9 Hz; Characteristic rolling element frequency, BSF:7.88 Hz; |
| TOKYO KEIKI SQP2-10-86C-18 Single Vane Pump | s1:27.8 mm; Designation of bearing:ES206-18G2T20; d1:44.1 mm; A:32 mm; L1:72 mm; Recommended tightening torque for set screw:8 Nm; d:28.58 mm; B1:35.7 mm; G1:M24; Weight:1.05 kg; |
| TOKYO KEIKI SQP1-11-86C-18 Single Vane Pump | rs min:3 mm; B:80 mm; ra max:2.5 mm; Y1:2.12; da min:144 mm; Characteristic cage frequency, FTF:0.42 Hz; Fatigue limit load, Cu:80.2 kN; d:130 mm; Da max:216 mm; Characteristic inner ring frequency, BPFI:10.36 Hz; |
| TOKYO KEIKI QP4-50-86C-18 Single Vane Pump | H:72 mm; A:20 mm; C0:6.65 kN; Designation of housing:C204-; B:34 mm; B1:43.5 mm; Recommended tightening torque for set screw:3.7 Nm; A3:1.5 mm; S:17 mm; d:12.7 mm; |
| TOKYO KEIKI SQP1-5-86C-18 Single Vane Pump | B:24 mm; r1s min:1.5 mm; Da max:116.5 mm; Dynamic load, C:138 kN; C:21 mm; Fatigue limit load, Cu:21.2 kN; Da min:110 mm; T:26.25 mm; D:125 mm; Max operating temperature, Tmax:120 °C; |